GN trays vs 600 × 400 bakery trays: will they fit your oven?

Posted by Herits Food Machinery on 18th Nov 2026

GN trays vs 600 × 400 bakery trays: will they fit your oven?

GN 1/1 trays and 600 × 400 mm bakery trays are different sizes. Before buying a commercial oven, match your trays to the exact model and the supports fitted inside it. An oven being large enough on the outside, or having the right number of shelves, does not confirm that your existing trays will fit.

For a café replacing a bake-off oven, or a bakery adding a combi, this is worth checking before agreeing the purchase. The useful question is whether your actual trays can enter, sit securely on the supports and leave enough room for the food you cook.

GN 1/1 and 600 × 400 are different tray formats

GN means Gastronorm. It describes a family of container sizes, so a listing that says only “GN trays” is incomplete. You need the particular size as well as the tray's depth and construction.

Format Nominal dimensions What to check
GN 1/1 530 × 325 mm Exact oven capacity, tray supports and insertion direction
Bakery format 600 × 400 mm Explicit support for this format on the fitted rails or rack
GN 2/1 650 × 530 mm Do not infer bakery-tray compatibility from the larger footprint

Retigo's manufacturer size chart lists GN 1/1 as 530 × 325 mm and GN 2/1 as 650 × 530 mm. The bakery format has both a longer and a wider side than GN 1/1. Turning a tray around does not make the two formats equivalent.

These are nominal format dimensions. Measure your actual tray over its outer rim, including any projecting handles or lips. Its flat cooking surface is a different measurement and is not the dimension to use when checking entry and support.

Match the exact oven, rather than the brand name

Two ovens from the same manufacturer can use different tray systems. For example, Unox lists its BAKERLUX SHOP.Pro TOUCH XEFR-04EU-ETDV for four 600 × 400 trays, with 75 mm between levels. Its CHEFTOP XEVC-0511-GPRM specification lists five GN 1/1 trays and a 67 mm tray pitch.

Those are examples of format and spacing differences, not a recommendation of either model or a statement of HERITS stock. A similar-looking oven, a different model suffix or a changed set of supports needs its own check.

Where a seller says an oven accepts both formats, ask how. Confirm the correct rack, rails or manufacturer-specified accessory and whether it is included. A tray resting loosely on an improvised support is not evidence of compatibility.

For the wider choice between convection, combi and bakery ovens, see our commercial oven buying guide.

Check the tray's entry, support and orientation

Ask for the manufacturer's model documentation and photographs of the actual oven interior. For a used machine, compare the fitted supports with that information, rather than relying on a catalogue photo.

Check three things together:

  1. Entry: can the full outer tray rim pass through the opening in the intended direction, without catching the door, seal or projecting fittings?
  2. Support: does the tray sit securely on the intended runners? A tray can be small enough to enter a chamber but too narrow for its supports.
  3. Depth and orientation: does it slide into the correct position without touching rear obstructions, and can the door close normally?

Record which edge goes into the oven first. A width measurement without that orientation can cause confusion when comparing a tray with a drawing. Ask the supplier to demonstrate fit with the correct tray or confirm the exact tray and support combination in writing. A diagonal test or a bare internal-chamber measurement leaves too much unanswered.

Rail pitch is not usable food clearance

Tray pitch is the vertical distance between successive support levels. It is not a promise that food of that height will fit between loaded trays.

The Unox XEFR-04EU-ETDV drawing and specification identify a 75 mm tray pitch. That figure still needs to be considered alongside the tray profile, the tray above, the height of the food and the manufacturer's loading guidance.

A deep roasting pan, tall loaf or rising product may need more vertical room than a shallow sheet of biscuits. You may need to leave levels unused. Confirm a suitable loading arrangement for your product and airflow requirements, rather than treating the advertised level count as guaranteed usable capacity for every bake.

A practical check when replacing a bakery oven

Suppose your café already owns twenty trays measuring 600 × 400 mm and is considering a five-level GN 1/1 oven. Keeping those trays is an operational requirement, not a detail to sort out after delivery.

Compared with GN 1/1's nominal footprint, each bakery tray is 70 mm longer and 75 mm wider. That simple comparison flags a format mismatch; it does not establish the proposed oven's internal clearances.

Ask whether that exact oven has an approved way to support your trays. If not, compare the cost and disruption of changing trays with choosing an oven built for your existing format. Include any replacement racks or proving equipment in that decision. Do not assume that an additional oven level compensates for a different tray size or your product's loading needs.

Check the whole tray route

The tray must work beyond the oven. Check any proving cabinet, retarder, cooling rack, trolley, storage position and washing arrangement through which it passes.

Buying an oven that accepts the new format can still leave you transferring products or replacing other equipment if the rest of the route does not. Write down what you intend to retain and ask about each item separately. Our bakery equipment guide covers the broader setup; this tray check is one part of it.

What to send before buying a used oven

A useful enquiry includes:

  • The oven's full model code, serial details and a clear rating-plate photograph.
  • Your tray's outer length, width, depth and a photograph of its rim or handles.
  • The intended insertion direction and photographs of the oven supports.
  • The food you cook, its loaded height and the number of trays needed in a normal batch.
  • Any racks, trolleys or proving equipment you want to keep.
  • A request to confirm the compatible supports, trays and accessories included in the sale.

Check tray fit alongside the oven's condition, site connections and installation requirements. Fit alone does not make an oven suitable for the job.

Browse HERITS commercial ovens or contact HERITS with your tray measurements and the model you are considering. Ask us to confirm the actual machine's tray format, fitted supports and included accessories before ordering.