Posted by Herits Food Machinery on 18th Nov 2026
How to size a commercial fryer for peak service
Start with the busiest 15 minutes of service. Work out how much food the fryer needs to cook in that window, then check how much the exact model can handle in repeated batches. Oil capacity tells you how much oil the pan holds. The basket load and the time between finished batches tell you far more about how quickly you can clear a queue.
Count portions in your busiest 15 minutes
Pull the busiest stretch from your till or order history. Count fryer portions across dine-in, takeaway and delivery, including sides that come with mains. If you are opening a new kitchen, use a busy-service estimate based on your menu and planned orders. For chips, weigh a portion before cooking so that the portion weight and batch load are on the same basis.
For example, 36 portions at 150 g of frozen chips per portion come to 5.4 kg of frozen chips in 15 minutes. If several orders arrive together, you also need to know how long the last one will wait. A quiet half-hour after the rush does little for a customer whose food is already on the pass.
Check how many batches you can finish
Ask what load the manufacturer allows and how quickly the fryer can turn around batches of the product you actually serve. Time from the start of the first load to the point where each batch is ready to serve. Include handling and any wait for the fryer to recover before loading again. A cold load draws heat from the oil. Watching what happens on the second and third batch tells you more about a rush than timing one basket on a fryer that has been sitting at temperature.
Suppose a trial with your chips shows that one pan can handle 1.2 kg per batch and finish a batch every five minutes, starting with the oil ready. These figures are illustrative. Use the instructions and observed performance for your own machine.
- One pan completes three batches in 15 minutes, or 3.6 kg. That leaves 1.8 kg still to cook.
- The full 5.4 kg needs five loads, with the last one partly filled. At the assumed pace, allow about 25 minutes on that one pan.
- Two independent pans with the same performance could complete six batches, or 7.2 kg in 15 minutes, if both can be used for chips and the team can keep both supplied.
Most kitchen orders do not arrive in neat waves. Include a buffer for mixed orders, staff covering other stations and the time it takes to portion and load. Test that buffer on a busy-service trial where possible.
Read the output rating alongside the oil capacity
Falcon lists 18 litres and 34 kg of chips per hour for its G3840 gas fryer. Its E3830 electric fryer specification lists 20 litres and 24 kg of chips per hour. The model with the bigger oil fill has the lower published chip output in this example. These are manufacturer figures for two specific models. Ask how the output was measured, particularly if you are comparing different manufacturers or using a different product.
An hourly figure helps you shortlist machines. Dividing it by four gives an average 15-minute equivalent, but it cannot tell you when the next full basket will be ready. Falcon's fryer buying guide explains how chip type and whether you cook from chilled or frozen can affect output. Check the load and repeated batch timing before choosing.
Decide whether you need two baskets or two pans
Two baskets in a single pan are handy for staggering small orders. Both draw heat from the same oil, so time the fryer with both baskets in use before counting the extra output. Where the bottleneck is several items competing for the same fryer, check whether independently controlled pans give your team enough room to work. If one pan will be occupied by another menu item at peak service, count only the pan time you actually have for chips.
What to check before buying a used commercial fryer
Ask for the exact model and a readable rating-plate photo. Confirm the number of pans and baskets included, then ask whether a hot test or repeated-batch demonstration is available. If there is a test, ask what product and load were used, how many batches were run and when each batch was ready. Have your installer check the manufacturer's requirements against the intended space, services and ventilation. The HERITS guide to single-phase and three-phase catering equipment can help you identify what to ask about an electric model.
Browse commercial fryers at HERITS or contact HERITS with your 15-minute portion count, main fried items and the space and services you have. Those details make it easier to discuss which models to shortlist.